abrahamsson Door Knob May 23rd, 2018 - 10:37:24
Some of them have obtained popularity all over the world because of their suitability and quality. Here I am going to tell you about some important information about two forms of door handles - door knobs and door levers. Door knobs are actually the traditional form of door handle which is preferred by many users who are interested in adding highlights to their home. These come in many forms and styles. You can find chrome and brass door knobs among many others. Usually knobs are of round sphere or oval shape. Modern manufacturers are adding different designs as well.
Also a good resistive structure is needed. Deadbolts are used along with exterior door levers. We have to pull out these deadbolts latches if we want to replace the knob. Interior knobs have a basic structure somewhat simpler than an exterior knobs properties so they are simpler to replace. The main screws need to be removed first using a screwdriver. Then the two knobs on each direction will automatically come out. After that faceplate screws on the edges need to be taken out to remove the latching parts. Then the main plate needs to be taken out removing the anchor screws. These are the basic tasks to remove a door knob. Then the question of installing the new door knob arrives.
Once done you will now see the inside of the wooden door and the part of the doorknob that goes through it. Push the opening and closing mechanism on the front of the door and at the same time pull the remaining piece of the door knob from the outside it will slide out easily leaving a hole that goes through the door. Once this is done take the opening and closing mechanism and slide it out the front of the door too. Now you have to reverse the process place the opening and closing mechanism through the front of the door make sure the flat side of the mechanism looks to the side to which the door opens.
If the door opens outwards the flat side should look outwards too if it opens to the inside the flat side should look inwards. Now slip in the cylinder through the door knob hole while holding the opening and closing mechanism pushed in so that it fits into the space provided for it in the door knob cylinder. Find the two large screws and the metal cover that go on the inside and screw it in place. Make sure it is tight but not overly tight. Test this by tuning the outside knob the opening and closing mechanism should retract without resistance.